Agetel AG190 Flash File SC6533G (Firmware) 100% Tested
Looking for the Agetel AG190 flash file? You’ve come to the right place. This page provides a 100% tested and safe firmware file for the Agetel AG190, along with a complete flashing guide and direct download links. This flash file can resolve a wide range of software issues, including hang on logo, dead recovery, IMEI repair, and password unlocking.
Agetel AG190 Flash File SC6533G
The Agetel AG190 runs on the Spreadtrum SC6533G chipset. To flash this device, you will need a compatible flashing tool such as InfinityBox CM2Scr or Miracle Box. The process is straightforward, but it is essential to follow the instructions carefully and verify that your device matches the correct CPU model before proceeding.
Agetel AG190 Flash File Reading Info
Wait for device ...
Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : "YS03_H3270_AGeTel_AG190_240X320_V01"
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!
Read done, 0x00400000
Verify FlashContent
MCU verified
CAL verify FAILED! WARNING! FILE CAN BE BAD OR DAMAGED!
FAC verified
Device Info Details :
[0] : YS03_H3270_AGETEL_AG190
[1] : 6533
[2] : SC6533G_FP
[3] : SC6533G
[4] : pasw_SC6533
[5] : flsh_spi32m
[6] : gc9307/gc9306
[7] : gc6123/sp0821
[8] : SCbt_6533
[9] : SCfm_6533G
[10] : release
[11] : 30_01_2026_14:25:25
[12] : YS03_H3270_AGeTel_AG190_240X320_V01
Saved to : C:\Users\b\Desktop\Read Flash 2\AG190\
Saved as : SC6533_4MiB_YS03_H3270_AGETEL_AG190_YS03_H3270_AGeTel_AG190_240X320_V01_30_01_2026_142525.ilod
Done!
Elapsed: 00:00:24
Reconnect Power/Cable!Agetel AG190 Flash File Download Link
- Device Model: Agetel AG190
- CPU Type: SPD SC6533G
- File Size: 4MB
- Version: YS03_H3270_AGeTel_AG190_240X320_V01
- Compressed: WinRAR And 7Zip
- Password: Paid
Agetel AG190 Flash Tools And Driver
Agetel AG190 Boot Key
Boot keys are required for flashing firmware and unlocking passwords on a Windows PC via USB. They are primarily used with Chinese SPD CPU feature phones.
Boot Key for This Model: Use SPD Boot Cable
How to Flash the Agetel AG190
⚠️ Important: Back up all data before flashing. The process will erase everything on the device.
- Download the Agetel AG190 flash file from the link above.
- Install the Agetel AG190 USB driver on your PC. Skip this step if already installed.
- Open the flash tool (CM2 or Miracle Box).
- Remove the battery from the device, then reinsert it.
- Select the downloaded flash file and click Write Flash.
- Connect your device to the PC via USB cable and press the boot key.
- The flashing process will begin automatically. Allow up to 5 minutes to complete.
- Once the progress reaches 100%, the flash is complete.
✅ Your Agetel AG190 has been successfully flashed!
Benefits of Flashing the Agetel AG190 Firmware
- Unbrick a dead or soft-bricked device using the stock ROM
- Fix persistent boot loops and hang-on-logo issues
- Upgrade or downgrade the firmware version
- Resolve network and signal-related problems
- Remove root access to restore warranty eligibility
- Reset or bypass security locks and passwords
- Fix software bugs and system instability
- Restore the device to its original factory state
Conclusion
Flashing the latest firmware on your Agetel AG190 is an effective way to resolve software issues and restore your device to peak performance. By following the steps in this guide and ensuring compatibility with the correct firmware version, you can fix bugs, improve stability, and extend the lifespan of your device.
If you encounter any issues during the flashing process, feel free to contact me. I’ll be happy to assist you. You can reach me via Facebook or WhatsApp.
